Payment & Shipping Terms:
|Output Type:||MOSFET(PNP OUT)||I/O Points:||16CH|
|Input Signal:||NPN/PNP||Input Voltage:||DC24V|
|Output Voltage:||DC 12-24V||Connecting Cable:||2.5mm (24~12AWG) 6~7mm|
5A 16 Channel PLC Transistor Module 24V NPN / PNP Input Signal For Servo System
Transistor amplifying plate is non-contact, DC 24V controlled by 5-24V, transistor amplifying plate is divided into large current and small current type, large current MOS tube, small current Darlington tube, hydraulic solenoid valve Coil, electromagnetic switch, gas pressure solenoid valve, fluorescent lamps, etc. These can use Darlington tube, the maximum current 6A, high-power electromagnet, electromagnetic clutch, DC motor, high frequency heating, high current work light adopts MOS tube amplifier board, Transistor amplification board Tianli card input is NPN and PNP common, the world's PLC is suitable for use, in Europe a lot of PLC is 12V, when ordering explain about the voltage, there are some countries that use 5V, in The vast majority of PLCs in Asia are 24V output. The amplifier's amplifier outputs Darlington's tube. MOS transistors have both NPN and PNP. In Asia, they are usually controlled by NPN output. There are also some machine manufacturers that use PNP. Style wiring control, out of the European machine, the general cabinet all components must use PNP series, including PLC, PLC amplification board, photoelectric switch, sensors and so on.
The transistor's response speed is fast. There is no problem with switching off and turning 4 times a second. Some automation equipment must produce more than 200 products in one minute. This speed must be achieved, or it cannot meet the requirements.
Transistor output, this is the saying in circuit control. In many automation devices, the circuit ultimately needs to implement control on some execution components (such as motors, electromagnets). The control of these execution components by the circuit can be performed by switching devices such as relays, triacs, transistors, etc. Therefore, for the output of the circuit There are corresponding types of "relay output, bidirectional thyristor output, transistor output" and so on.
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self test and anti-interference
-- High quality MOSFET with large load and excellent stability
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
♦ Technical data
|Output type||MOSFET(PNP OUT)|
|Output voltage||DC 12-24V|
|Contact capacity(resistive)||5A 24VDC|
|Operation voltage/Release voltage||>5VDC/<1.5VDC|
|Operation time/Release time||<10ms/<10ms|
Contact Person: sales