Payment & Shipping Terms:
|I/O Points:||16 Channel||Output Type:||Omron Relay|
|Dimensions(WxH):||87×63mm||Input Voltage:||DC24V * DC5V,DC12V,AC110V,AC220V Can Be Customized.|
|Output Contacts:||SPDT||Mounting:||Din Rail|
AC 220V Output PLC Relay Module , 16 Channel Omron relay Module For Servo System
Traditional control lines use PLC to control electrical components such as intermediate relays, electromagnetic switches, solid state relays, etc. They are independent components that take up a lot of space. So what can be used to save a little space? In recent years, electronic products and automation products have developed towards integration. Also developed a PLC amplifier board, PLC amplifier board is to amplify the current of the PLC, is to integrate several or more than a dozen relays on a PCB circuit board, or to a few or more than a dozen two-way SCR and light Even integrated on a PCB board, or several or a dozen transistors integrated on a PCB board, greatly reducing the space occupied by the cabinet, compared to the PLC relay middle relay or solid state relay, saving 1 /3 space and looks a lot upscale and intuitive.
PLC amplification board not only saves space, installation is also very convenient, you can use the standard DIN rail to install, save time and effort, cost is also very good, PLC amplification board is the future trend of industrial automation.
The PLC amplification board is a component between a programmable controller (PLC) and a solenoid valve and an electromagnetic switch. It can also be said to be a driver board, an isolation board, and a voltage-current conversion board. It is used instead of an intermediate relay and a solid state relay. , dozens, or dozens of relay designs are produced on a single circuit board, plus indicators, surge absorbers, fuses, and more.
This is called a relay module or a relay amplifier board to replace the intermediate relay. A few, dozens, or dozens of Darlington transistors (transistors), MOSFETs are designed on a circuit board, with indicators, photocouples, etc. Transistor amplifying board or MOS tube amplifying board is mainly used for controlling direct current load instead of direct current solid state relay, adding tens, dozens or dozens of thyristor (thyristor) designs to a circuit board with an optical couple, A circuit board composed of a luminous tube, a resistor, and the like is called a thyristor amplifying board, and is mainly used instead of an AC solid state relay, and is mainly used to control the load of alternating current.
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self anti-interference
-- Isolation for each relay channel
-- with relay base, easy to replace
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
• CE • CCC
♦ Technical date
|Output type||Omron Relay|
|Input signal||NPN and PNP compatible|
* DC5V,DC12V,AC110V,AC220V can be customized.
|Output voltage||AC/DC 0-250V|
|Contact capacity(resistive)||10A 250VAC|
|Operation voltage/Release voltage||≥75%Un/≤10%Un|
|Operation time/Release time||≤15ms/≤8ms|
Contact Person: sales