Payment & Shipping Terms:
|I/O Poles:||40||Dielectric Strength:||500VAC 1min|
|Ambient Operating Temperature:||-20℃~+55℃||Rated Voltage:||DC24V,AC125V|
Micro - Controller Interface Breakout Module , IDC Connector Unit 40 Pole Terminal Block
LED indication and non-wire stripping current measurement for convenient maintenance and repair: The power supply circuit and signal circuit are equipped with full LED signal indication and fuse fuse alarm, with clever not disconnected signal measurement signal current technology, measuring signal current as long as the current meter pen The test hole can be inserted, and the entire measurement process equipment can be continuously powered without affecting the normal measurement and control process, providing great convenience for maintenance work.
Rapid assembly: With the special mounting back plate with standard modular holes designed by our company, you can throw away the drilling tool and only need a screwdriver to complete the installation of the electrical components in the cabinet.
The current rating of components in Europe is determined by monitoring the temperature of the metal conductor as the current increases. When the temperature of the metal pin is 45°C higher than the ambient temperature, the measurement personnel will use this current as the rated current value (or maximum current value) of the device. Another of the IEC specifications is the allowable current value, which is 80% of the maximum current. In contrast, the UL standard will use 90% of the current value when the metal conductor temperature is 30°C above the ambient temperature as the current rating of the device.
It can be seen that the temperature of the metal conductor part is a very important factor in all applications. This is more important for industrial equipment. Because industrial equipment usually needs to work in environments with temperatures up to 80°C. If the terminal block temperature is 30°C or 45°C higher than this temperature, the terminal temperature will exceed 100°C. Depending on the type of nominal value and the insulating material used for the selected device, the product must be operated at a current lower than the rated value so as to ensure that they can operate reliably within the desired temperature range. In some cases, materials suitable for a compact packaged device may not meet the heat dissipation requirements well. Therefore, the current of such a terminal device must be significantly lower than the rated value.
-- Support most of PLC output interface
-- Standard DIN rain mounted
-- High quality connectors with excellent stability
-- Models available with Phillips screw, slotted screw
-- Greatly savings in wiring and wiring Work
-- Easy for inspection and maintenance
-- Compact slim 49mm width
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors • CNC machine
• Home intelligent control
♦ Technical data
Euro terminal (slotted screws)
*Japanese terminal (Phillips screws) can be customized
|Insuration resistance||100MΩ min. (at 500VDC)|
|Dielectric strength||500VAC 1min|
|Ambient operating temperature||-20℃~+55℃|
|Applicable wires||AWG 22-16(0.3~1.25mm2),6~7mm|
|Suitable Uses||Panasonic FPΣ PLC|
Contact Person: sales