Payment & Shipping Terms:
|Input And Output:
Input Output 40 Pole IDC Interface Module Breakout Board Male DC24V
Principle: When the relay coil is applied with the required voltage, the armature is attracted to the magnet, and the armature presses the contact tab to turn the contact on, off or switch the controlled circuit. When the coil voltage of the relay is disconnected, the armature and the contact piece return to their original positions.
Function: The general relay has 2 pairs or 4 pairs of normally open normally closed contacts. When the coil is closed, the normally open and normally closed, normally closed and normally open. If, at this time, the normally open normally closed contact is connected to other Controlling the line serves to close or disconnect other lines.
These ribbon cable terminal block interface modules mount on stanard DIN rail and accept 10-position connector to 64-position connector. Ribbon Cable interface modules are available with either fixed wiring or pluggable terminal blocks.
-- Support most of PLC output interface-- Standard DIN rain mounted
-- High quality connectors with excellent stability
-- Models available with Phillips screw, slotted screw
-- Greatly savings in wiring and wiring Work
-- Easy for inspection and maintenance
-- Compact slim 49mm width
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors • CNC machine
• Home intelligent control
♦ Technical data
Euro terminal (slotted screws)
*Japanese terminal (Phillips screws) can be customized
|100MΩ min. (at 500VDC)
|Ambient operating temperature
|Panasonic FPΣ PLC
Contact Person: sales