Payment & Shipping Terms:
|I/O Points:||8 Channel||Output Type:||Weidmuller Relay|
|Operation Voltage/Release Voltage:||≥75%Un/≤10%Un||Output Voltage:||AC/DC 0-250V|
|Output Contacts:||DPDT||Operation Time/Release Time:||≤15ms/≤8ms|
Micro - Controller Optocoupler Relay Module 1 CO ( SPDT ) Output Contacts JR-8W2
The PLC amplifier board is evolved from the intermediate relay and the solid state relay, and the size is much smaller. The installation is more time- and labor-saving, and the wiring is more convenient. The PLC amplifier board is the product of scientific and technological progress in the 21st century. The future is very promising and there is no automatic equipment. Ships, oilfields, and power plants will use Puki to reach 95% space savings, easy installation, future labor is the most expensive, and the cost of the product is the most convenient.
PLC amplifier board includes three series, relay amplifier board, transistor amplifier board, thyristor amplifier board.
The relay amplifies the board according to the contact points to open, one opens and closes, two opens and closes, according to the voltage divides DC12V, DC24V, AC220V, divides into the Japanese type terminal and the European style terminal according to the wiring branch, divides according to the current divides 5A, 10A , 12A, 16A, 30A, divided by road from 2 to 32, according to the relay points Panasonic, OMRON, IDEC, Tyco. The relay amplifier board controls the load of AC/DC 0-220V.
Transistor amplifying board according to the input and output points, the input is NPN and PNP common, the output is NPN and PNP two, divided by current into 6A and 15A, 15A using MOS tube, according to the wiring is divided into Japanese terminals and European Two kinds, according to the number of ways points from 2 to 16 have, transistor amplifier board is to control the DC24V contactless on-off control load.
The input of thyristor amplifying plate is common for NPN and PNP, and the output points are independent and common. If the current is relatively large and independent output is used, the thyristor amplifying plate controls the AC24-250V contactless on-off control load.
-- Standard DIN rain mounted
-- Status indication for each input
-- Special circuit for self anti-interference
-- Isolation for each relay channel
-- with relay base, easy to replace
♦ Typical Applications
• Micro-controller • PLC control • Servo System
• Electro-magnetic valve • DC Motors
• Home intelligent control
• CE • CCC
♦ Technical date
|Output type||OMRON Relay|
|Input signal||NPN and PNP compatible|
* DC5V,DC12V,AC110V,AC220V can be customized.
|Output voltage||AC/DC 0-250V|
|Contact capacity(resistive)||10A 250VAC|
|Operation voltage/Release voltage||≥75%Un/≤10%Un|
|Operation time/Release time||≤15ms/≤8ms|
Contact Person: sales