Product Details:
Payment & Shipping Terms:
|
| Pressure Unit: | MPa,kgf/cm2,PSI Adjustable | Overload Pressure: | 150% |
|---|---|---|---|
| Accuracy Grade: | ±0.5%FS | Power Supply: | 24VDC、220VAC、380VAC |
| Load Capacity: | 380V 3A 220V 5A 24V 5A | Sampling Frequency: | 10 Times/sec |
Electronic Digital Pressure Switch Upper Limit Alarm For Air Pump CE / CCC Certification
Digital pressure switch, also known as smart pressure switch, is an intelligent, high-precision pressure control device that integrates pressure measurement, display, and control.
The main functions of digital pressure gauges are simple operation, low price, anti-vibration, high control accuracy, and long service life.
The pressure switch has a delay control function, three display units can be arbitrarily switched, the error of a key to clear and other functions.
1.(ON/OFF) Run key: System run key, the parameter must be set to close the run key, otherwise the setting cannot be performed.
2. (SET) setting key: short press this key to enter the pressure upper and lower limit setting state, press and hold for 3 seconds to enter the system setting state.
3. Increase the key (▲): Press the key once to increase the number by 0.01MP. Press and hold for 2 seconds to increase the number by 0.1MPa.
4. Decrease the key (▼): Press the key once to decrease the value by 0.01MP. Press and hold for 2 seconds to decrease the value by 0.1MPa.
♦ Features
-- 4 digital LED display pressure, Accuracy≤0.5%
-- Three pressure units available ( Psi, Kg/cm2 , Mpa)
-- Adjustable high & low pressure threshold and delay time
-- Adjustable control mode:normal control and reverse control
-- Pressure leak and loss protection,secure setting-up
-- Anti-electromagnetic interference design
-- Zero clearing with one button
♦ Protective Functions
● Upper limit alarm(high pressure)
● Lower limit alarm(low pressure)
● Pressure leak alarm
● Pressure loss alarm(no pressure)
♦ Typical Applications
• Machine Automation • Engineering Machinery
• Electromechanical Integration Equipment • Pump&compressor
• Hydraulic System • Medical project • Pipeline engineering
♦ Specification
| Pressure range |
General type:0~1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60Mpa Micro type:0~0.2, 0.5Mpa Negative type: -0.1~0.1Mpa |
| Pressure unit | MPa,kgf/cm2,PSI adjustable |
| Overload pressure | 150% |
| Accuracy grade | ±0.5%FS |
| Power supply | 24VDC,220VAC,380VAC |
| Alarm point | Full range can be set |
| Alarm type | relay signal |
| Load capacity | 380V 3A ,220V 5A ,24V 5A |
| Sampling frequency | 10 times/sec |
| Operating temperature | -20℃-80℃ |
| Compensation Temperature | -10 ~60 ℃ |
| Measurement medium | Gas, water, oil (compatible with 316 stainless steel) |
| Electric protection | Short-circuit protection, reverse polarity protection, anti-electromagnetic interference design |
| Pressure connector | M20*1.5 G1/2,G1/4 (other connector could be customized) |
| Connector material | 304SS |
| Optional module | RS485 Modbus Communication protocol |
| Dial diameter | 100mm |
| Shell material | 304SS |
| Mounting methods | Axial direction or radial direction optional |
| Weight | 0.6Kg |
Contact Person: sales
Tel: +8613757785251
